Specification
Brand
Comp Cams
Item Number
32-234-4
UPC
036584520092
Camshaft Series
Magnum
Usage
Street/Strip
Cam Type
Hydraulic Flat Tappet
Grind Number
292H
Basic Operating RPM Range
2,500-6,500
Advertised Intake Duration
292
Advertised Exhaust Duration
292
Intake Duration at .050 Inch Lift
244
Exhaust Duration at .050 Inch Lift
244
Intake Valve Lift
0.560 inches
Exhaust Valve Lift
0.560 inches
Lobe Separation
110 degrees
Intake Centerline
106 degrees
Valve Timing Lift
0.006 inches
Exhaust Close ATDC
32 degrees
Intake Open BTDC
40 degrees
Exhaust Open BBDC
80 degrees
Intake Close ABDC
72 degrees
Camshaft Gear Attachment
1-Bolt
Camshaft Material
Cast Iron
Engine Family
Ford 351C, 351M-400M 8 Cylinder (1970-1983)
Lifter Type
Hydraulic Flat Tappet
Valve Springs Required
Yes
Assembly Lubricant Included
Yes
Warranty
12 Months
California Proposition 65
WARNING: Cancer and Reproductive Harm P65Warnings.ca.gov
Description
The Comp Cams Magnum 244/244 Hydraulic Flat Camshaft is engineered for Ford 351C, 351M, and 400M engines, delivering optimal performance in street and strip settings. With a basic operating RPM range of 2,500 to 6,500, this camshaft features an advertised duration of 292 degrees for both intake and exhaust, and a valve lift of 0.560 inches. Designed for use with a 3000+ stall converter and 10:1 compression ratio, it provides a racey idle and requires low gears. Note: Valve springs are required for installation.
Disclaimer
Installation of this camshaft requires valve springs and may necessitate additional modifications. Ensure compatibility with your vehicle's specifications before purchase. Professional installation is recommended.